You need wide toe box lacrosse cleats. We have something better: a pair built from a scan of your feet, so the width is yours and not a letter on a box.
Custom isn't the only route, though, and the list below includes cleats I don't make. I've been designing and 3D printing cleats for most of the last decade, and I have wide feet, so I've spent an unreasonable amount of my life thinking about this.
SHOP CUSTOM FIT LACROSSE CLEATS
The best lacrosse cleats for wide feet
These are the routes I'd look at today, roughly from most room to least. Mine is first on my own list. Shocking, I know. Prices are current as of fall 2026.
- Prevolve custom fit lacrosse cleats, $595 to $745 for adults and $245 for kids. Built from a 3D scan of your feet, so the toe box, the width and the plate follow your shape, on a zero-drop sole with turf or grass studs. The catch: the price, and a wait of 4 to 6 weeks while we build your pair.
- New Balance FreezeLX and BurnX, in wider versions, roughly $120 to $140. The usual first stop for wide-footed lacrosse players, and the one you might be able to buy this week. The catch: wide options change by model and by retailer, so check the exact listing, then compare the plate as well as the upper.
- Foot-shaped soccer cleats, such as the Natur Athletics Iron Lion or the FreeKickz Primo AG, both about $190. Zero drop and much roomier than a mainstream boot. Soccer cleats are widely worn in field lacrosse, but check your league's rules. The catch: they're built for soccer, and each is one standard shape, so they're wide in a general way rather than wide in your way.
- Sizing up in a regular cleat. Free if you already own them, and the advice you'll hear most. The catch: you add length along with room, your heel starts to slide, and your forefoot still sits on a plate drawn for a narrower foot.
Not just lacrosse? The wide cleats guide covers the same question across every field sport.

Why lacrosse is hard on a wide foot
Lacrosse is a sport of hard plants. You dodge, plant, rotate and go again, with a stick in your hands and a defender on your hip, and much of it happens on turf. A tight toe box can get away with a lot on a straight-line jog. It gets away with very little on the fourth split dodge of a possession.
In a study of 21 experienced soccer players wearing in-shoe pressure sensors, cutting loaded the inside of the foot, with higher pressures than normal running. That's the same side where a tapered toe box leans on your big toe.
Your toes are also part of the move. In 17 collegiate American football players, toe-pushing force tracked pro-agility and 3-cone times, and it did not track straight-line sprint. A small study in a different sport, but the same plant and go. I want those toes spread out and working, not folded into a point because a point looks fast.
Ankles are the other bill that comes due. In six seasons of NCAA men's lacrosse data, covering 1,055 injuries, 58.3% were to the lower body, and the ankle sprain was the single most common specific injury in both games and practices.
Every lacrosse pair we build keeps your heel level with your forefoot and shapes the toe box from your scan, because a foot planted flat, with its little toe out at its true width, has less to tip over. I expect fewer rolled ankles from that setup, and smaller ones when they do happen. Not every sprain can be prevented, and a foot coming out of years in a raised, narrow cleat needs a ramp and some training before it can do that job.
Then there's the tournament weekend. Two or three games a day, on feet that swell as the day goes on. A cleat that was merely snug on Saturday morning is a real problem by Sunday afternoon, and that's usually when the blisters show up.
Why wide lacrosse cleats are hard to find
Feet vary far more than sizes do. In a study of 1,200,847 in-store foot scans, one stock width fit at most 40.1% of feet, and covering 90% took at least three widths at every length. Every extra width means more tooling and more stock to forecast, and lacrosse is a much smaller market than soccer or football. So the widths get thin fast.
The label also hides a lot. Width is at least three measurements: heel, midfoot and toe box. A narrow heel with a wide forefoot is common, and a single wide size can give you room at the front and a sloppy heel at the back.
If you're shopping off the shelf, here's what I'd check:
- The plate. Put the wide and standard versions side by side. If only the upper grew, your forefoot hangs over the edge of the plate.
- The toe shape. A wide cleat that still tapers to a point has room in the wrong place. Your big toe should have a straight path forward.
- The heel. Extra room up front is worth nothing if your heel lifts on every plant.
- The time of day. Try them on late in the day, in your game socks, and do a few hard stops on the shop floor. Nobody will mind. They may stare.
How custom fit lacrosse cleats work
We start from your foot instead of a size chart. You scan your feet from home with a phone and send photos showing your toes. Our design algorithm then shapes the last, the toe box, the stud layout and the plate for that foot, using your weight, your position and your foot strength. Then we print it. There's no mold to pay off and no stockroom to fill, so a very wide foot costs us no more tooling than a narrow one.
The toe box always starts from your scan, so your toes can spread. How generous we go, and how much the plate flexes, both depend on your foot strength level. A foot coming out of fifteen years in tight cleats starts on a firmer plate and works up from there. If you want the longer version, here's how custom fit actually works.
Turf or grass: which studs to pick
We build lacrosse cleats on four ground types: AG Conical, AG Bladed, FG Conical and FG Bladed. Stud placement comes from your scan either way, so the real choice is your surface.
On turf, start with AG Conical. Shorter, more numerous studs spread your weight across more contact points and release more easily when you change direction. On real grass, go FG. Long FG studs make less sense on turf, where they can grab just when you want your foot to turn.
More grip sounds like an easy win, but there are two kinds: the grip that stops you sliding and the grip that stops your foot turning. In a lab study of 10 athletes cutting on artificial turf, lowering the second kind lowered the load at the ankle and knee. A review of three American football studies found about 2.5 times the odds of lower-limb injury in players with higher rotational traction. Neither study is lacrosse, but a plant is a plant, and I wouldn't go hunting for maximum bite.
Lacrosse cleat questions
Do you make women's lacrosse cleats?
Yes, though there's no separate women's version. Every pair is built from the scan of the person wearing it, so there's no men's last to squeeze into. Same cleat, same prices, your shape.
Is there a cushioned insole?
Yes. Your pair has a custom insole with cushioning. Metatarsal pads and toe spacers are optional extras if you want them.
What does a pair cost, and how long does it take?
Your scan sets your size: Small $595, Medium $695, Large $745, and Kids $245 for feet under 22 cm. A fully custom colorway adds $95. Most pairs ship in 4 to 6 weeks. A first pair from a new scan comes with a free 3D Fit Sock, so you can check the fit on your own feet before we build the cleats, and your scan stays on file, with following pairs at 25% off.
You'll wish you had discovered this years ago. The next best time is now.


